產(chǎn)品名稱HTL730
產(chǎn)品介紹
| 國際標準型號 | INTERNATIONAL CLASS | NO | HTW730 | |||
| L款規(guī)格 | SPCIFICATION | CN | HTL730 | |||
| A | B | C | D | |||
| 注射裝置 | INJECTION UNIT | |||||
| 螺桿直徑 | Screw diameter | mm | 90 | 95 | 105 | 110 |
| 螺桿長徑比 | Screw L/D ratio | L/D | 23.2 | 22 | 19.9 | 19 |
| 理論注射容量 | Shot volume(theoretical) | cm3 | 3181 | 3544 | 4330 | 4752 |
| 注射重量 | Injection weight(ps) | g | 2895 | 3225 | 3940 | 4324 |
| 注射速率 | Injection rate | g/s | 574 | 640 | 781 | 858 |
| 注射壓力 | Injection pressure | Mpa | 195 | 175 | 143 | 130 |
| 螺桿轉(zhuǎn)速 | Screw speed | rpm | 115 | |||
| 鎖模裝置 | CLAMPING UNIT | |||||
| 鎖模力 | Clamping force | KN | 7300 | |||
| 移模行程 | Open stroke | mm | 950 | |||
| 拉桿間距(寬×高) | Space between tie bars(W×H) | mm | 950×950 | |||
| 最大模厚 | Max.Mold height | mm | 960 | |||
| 最小模厚 | Min.Mold height | mm | 400 | |||
| 頂出行程 | Ejector stroke | mm | 280 | |||
| 頂出力 | Ejector stroke | KN | 210 | |||
| 其他 | OTHERS | |||||
| 最大油泵壓力 | Max.Pump pressure | Mpa | 16 | |||
| 最大馬達功率 | Pump motor power | KW | 37+37 | |||
| 電熱功率 | Heating power | KW | 56.7 | |||
| 外形尺寸(長×寬×高) | Machine dimension(L×W×H) | m | 11.43×2.40×3.14 | |||
| 油箱容積 | Olitank cubage | L | 1200 | |||
| 機器重量 | Machine weight | t | 37 | |||
