產品名稱HTL500A
產品介紹
| 國際標準型號 | INTERNATIONAL CLASS | NO | HTW500 | ||
| L款規格 | SPCIFICATION | CN | HTL500A | ||
| A | B | C | |||
| 注射裝置 | INJECTION UNIT | ||||
| 螺桿直徑 | Screw diameter | mm | 75 | 80 | 85 |
| 螺桿長徑比 | Screw L/D ratio | L/D | 22.7 | 21 | 20 |
| 理論注射容量 | Shot volume(theoretical) | cm3 | 1900 | 2161 | 2440 |
| 注射重量 | Injection weight(ps) | g | 1729 | 1967 | 2220 |
| 注射速率 | Injection rate | g/s | 386 | 442 | 499 |
| 注射壓力 | Injection pressure | Mpa | 191 | 168 | 148 |
| 螺桿轉速 | Screw speed | rpm | 130 | ||
| 鎖模裝置 | CLAMPING UNIT | ||||
| 鎖模力 | Clamping force | KN | 5000 | ||
| 移模行程 | Open stroke | mm | 770 | ||
| 拉桿間距(寬×高) | Space between tie bars(W×H) | mm | 820×800 | ||
| 最大模厚 | Max.Mold height | mm | 810 | ||
| 最小模厚 | Min.Mold height | mm | 330 | ||
| 頂出行程 | Ejector stroke | mm | 240 | ||
| 頂出力 | Ejector stroke | KN | 150 | ||
| 其他 | OTHERS | ||||
| 最大油泵壓力 | Max.Pump pressure | Mpa | 16 | ||
| 最大馬達功率 | Pump motor power | KW | 55 | ||
| 電熱功率 | Heating power | KW | 31.4 | ||
| 外形尺寸(長×寬×高) | Machine dimension(L×W×H) | m | 8.4×1.92×2.76 | ||
| 油箱容積 | Olitank cubage | L | 900 | ||
| 機器重量 | Machine weight | t | 18.5 | ||
