產品名稱HTX200
產品介紹
| 國際標準型號 | INTERNATIONAL CLASS | NO | HTW200 | ||
| L款規格 | SPCIFICATION | CN | HTX200 | ||
| A | B | C | |||
| 注射裝置 | INJECTION UNIT | ||||
| 螺桿直徑 | Screw diameter | mm | 45 | 50 | 55 |
| 螺桿長徑比 | Screw L/D ratio | L/D | 23.3 | 21 | 19.1 |
| 理論注射容量 | Shot volume(theoretical) | cm3 | 340 | 420 | 510 |
| 注射重量 | Injection weight(ps) | g | 310 | 383 | 466 |
| 注射速率 | Injection rate | g/s | 124 | 154 | 186 |
| 注射壓力 | Injection pressure | Mpa | 207 | 168 | 139 |
| 螺桿轉速 | Screw speed | rpm | 155 | ||
| 鎖模裝置 | CLAMPING UNIT | ||||
| 鎖模力 | Clamping force | KN | 2000 | ||
| 移模行程 | Open stroke | mm | 475 | ||
| 拉桿間距(寬×高) | Space between tie bars(W×H) | mm | 530×530 | ||
| 最大模厚 | Max.Mold height | mm | 530 | ||
| 最小模厚 | Min.Mold height | mm | 200 | ||
| 頂出行程 | Ejector stroke | mm | 140 | ||
| 頂出力 | Ejector stroke | KN | 70 | ||
| 其他 | OTHERS | ||||
| 最大油泵壓力 | Max.Pump pressure | Mpa | 16 | ||
| 最大馬達功率 | Pump motor power | KW | 18.5 | ||
| 電熱功率 | Heating power | KW | 13.6 | ||
| 外形尺寸(長×寬×高) | Machine dimension(L×W×H) | m | 5.22×1.57×2.21 | ||
| 油箱容積 | Olitank cubage | L | 300 | ||
| 機器重量 | Machine weight | t | 7 | ||
